PUBLICATIONS 2022
- Dr. Vipin Sharma published a research paper in SCI journal ‘entitled “Approaches to measure volume fraction of surface composites fabricated by friction stir processing: A review” in ‘Measurement’ of Elsevier
- Dr. Vipin Sharma published a research paper in SCI journal entitled “Post-Processing of Stir Casted Al–Si12Cu Metal Matrix Composite by Friction Stir Processing” in the International Journal of Metal casting, Springer.
- Dr. Vipin Sharma published a research paper in SCI journal entitled "Sheet metal shrink flanging process: A critical review of the current scenario and future prospects" in Materials and Manufacturing Processes of Taylor and Francis
- Dr. Vipin Sharma published a research paper in SCI journal entitled ‘An approach to the Utilization of Grid Integration to Analyze the Performance and Quality of Solar Photovoltaic Model’ in Elsevier journal “Energy Reports”.
- Prof. NK Sagar published a research paper on the topic “Enhancement of Thermal Performance of Solar Air Heater using CFD Analysis” in the IJERCT ISSN: 2582-5488, Vol 4, Issue 3, June 2022.
- Prof. NK Sagar published a research paper on the topic “Solar Air Heater and its classification – A Review” in the IJERCT ISSN: 2582-5488, Vol 4, Issue 3, and June 2022.
- Prof. Prakash Katdare published a research paper on the topic “Two-Dimensional CFD Analysis on Different Rocket Nozzles”, in Graduate Research in Engineering and Technology, GRET Journal, ISSN: 2320-6632, Volume 1, Issue 7, 2022.
- Prof. Dinesh Ramchandani published a research paper titled “Performance Analysis of Solar Air Heater Using V-Shaped Ribs on Absorber Plate”, in the International Journal of Innovative Research in Science, Engineering and Technology, IJIRSET, ISSN: 2320-6710.
- Prof. Prakash Katdare published a research paper titled “CFD Analysis of Nozzle Flow with sudden Expansion in Aerospace Engineering”, in Graduate Research in Engineering and Technology, GRET Journal, ISSN: 2320-6632, Volume 1, Issue 7, 2022.
- Dr. Yogesh Agrawal published SCI research paper on the topic “A Numerical Investigation of an Artificially Roughened Solar Air Heater” Energies (MDPI), Volume 15, Issue 21, Page No. 1-27, 2022.
- Dr. Yogesh Agrawal published a Scopus research paper on the topic “Experimental Investigation of Heat Transfer and Flow Analysis of Artificially Roughened Solar Air Collector by using Double Arc Reverse Shaped Roughness with Gap on the Absorber Plate” Materials Today’s Proceedings, Elsevier Journal, 2022.
- Dr. Yogesh Agrawal presented a research paper on the topic “Experimental Investigation on thermal efficiency augmentation of solar air heater using copper wire for discrete roughened absorber plate” at ICAM 2022 International conference, 2-4 November 2022.
- Dr. Alok Agrawal presented a research paper entitled “Physical and Mechanical Behavior of Polyester-Based Composites with Micro-sized Blast Furnace Slag as Filler Material” at the international conference on Recent Advances in Modeling and Simulations Techniques in Engineering and Sciences organized by Manipal University Jaipur during 09 -11 November 2022.
- Dr. Alok Agrawal presented a research paper entitled “Physical, Mechanical and Sliding Wear Behavior of Epoxy Composites Filled with Micro-sized Marble Dust Composites” at the international conference on Recent Advances in Modeling and Simulations Techniques in Engineering and Sciences organized by Manipal University Jaipur during 09 -11 November 2022.
PUBLICATIONS 2021
Dr. Nitin Tenguria has published a research paper on the topic “Investigation of temperature distribution of fin profiles: A Review” in the Journal of Emerging Technologies and Innovative Research (JETIR), volume 8, Issue 6, 2021.
Dr. Nitin Tenguria has published a research paper on the topic “Verification A study on CFD Investigation of Temperature Distribution in Helical Fin Profile with Fluid Flows” in International Journal of Advanced Engineering Science and Technological Research, Volume 7, Issue 2, 2021.
Dr. Irshad Ahmed Khan has published a research paper on the topic “Physical and mechanical properties of epoxy reinforced with pistachio shell particulates” in AIP Conference Proceedings, Volume 2341, Issue 1, 2021.
Dr. Irshad Ahmed Khan has published a research paper on the topic “Prospects for the Uses of Alternative Fuels for Motor Vehicles: A Review” in the International Journal for Research & Development in Technology, Volume 15, Issue 6, 2021.
Dr. Santosh Kumar Sanodiya has published a research paper on the topic “A review of Computational Fluid Analysis of a Hospital Patient Room for Effective Utilization of Position of Air Conditioning System” in the International Journal of Engineering Research in Current Trends, Volume 3, Issue 4, 2021.
Dr. Santosh Kumar Sanodiya has published a research paper on the topic “Design of Helical Baffle and Thermal Analysis of Shell and Tube Type Heat Exchanger” in the Journal of Emerging Technologies and Innovative Research, Volume 2, Issue 4, 2021.
Dr. D K Koli has published a research paper on the topic “A review on energy analysis and performance of SRC and ORC Power generation system using waste heat source” in the International Journal of Science Engineering and Technology, Volume 9, Issue 2, 2021.
Dr. Nitin Tenguria presented a research paper on the topic “Magnetic Suspension System For Vehicles.” at the 2nd e-National Conference on Advances in Mechanical Engineering. NCAME-2021 Organized by the Department of Mechanical Engineering (NBA Accredited since 2009), Sagar Institute of Research and Technology, Bhopal, 06th - 07th May 2021.
Dr. Nitin Tenguria presented a research paper on the topic “CFD Analysis of Heat Transfer and Fluid Flow Characteristics through U-Tube Heat Exchanger with Twisted Tape Inserts.” in the 2nd e-National Conference on Advances in Mechanical Engineering. NCAME-2021 Organized by the Department of Mechanical Engineering (NBA Accredited since 2009), Sagar Institute of Research and Technology, Bhopal, 06th - 07th May 2021.
Dr. P K Jain presented a research paper on the topic “Review of Helical Baffle Component Design and Analysis of Shell and Tube Heat Exchanger.” at the 2nd e-National Conference on Advances in Mechanical Engineering. NCAME-2021 Organized by the Department of Mechanical Engineering (NBA Accredited since 2009), Sagar Institute of Research and Technology, Bhopal, 06th - 07th May 2021.
Dr. D K Koli presented a research paper on the topic “Optimization & Exergy Analysis on Performance of Organic Rankine Cycle with Different Working Fluids” at the 2nd e-National Conference on Advances in Mechanical Engineering. NCAME-2021 Organized by the Department of Mechanical Engineering (NBA Accredited since 2009), Sagar Institute of Research and Technology, Bhopal, 06th - 07th May 2021.
Dr. Irshad Ahmed Khan presented a research paper on the topic “Design and Development of Medicine Reminder Device.” at the 2nd e-National Conference on Advances in Mechanical Engineering. NCAME-2021 Organized by the Department of Mechanical Engineering (NBA Accredited since 2009), Sagar Institute of Research and Technology, Bhopal, 06th - 07th May 2021.
Dr. Santosh Sanodiya presented a research paper on the topic “Temperature Stratification and the Effect of Diffuser Inlet Position inside the Heat Ventilated Air Conditioning System.” at the 2nd e-National Conference on Advances in Mechanical Engineering. NCAME-2021 Organized by the Department of Mechanical Engineering (NBA Accredited since 2009), Sagar Institute of Research and Technology, Bhopal, 06th - 07th May 2021.
Prof. N K Sagar presented a research paper on the topic “A Theoretical analysis on Critical Radius of Insulation of Cylindrical Pipe Using Mineral wool Insulation Materials.” at the 2nd e-National Conference on Advances in Mechanical Engineering. NCAME-2021 Organized by the Department of Mechanical Engineering (NBA Accredited since 2009), Sagar Institute of Research and Technology, Bhopal, 06th - 07th May 2021.
Prof. Prakash Katdare presented a research paper on the topic “.Design of Regenerative Braking system ” at the 2nd e-National Conference on Advances in Mechanical Engineering. NCAME-2021 Organized by the Department of Mechanical Engineering (NBA Accredited since 2009), Sagar Institute of Research and Technology, Bhopal, 06th - 07th May 2021.
Prof. Prakash Katdare was presented a research paper on the topic “Design and Analysis of Rocker Boggy Robot.” at the 2nd e-National Conference on Advances in Mechanical Engineering. NCAME-2021 Organized by the Department of Mechanical Engineering (NBA Accredited since 2009), Sagar Institute of Research and Technology, Bhopal, 06th - 07th May 2021.
Prof. Sourabh Jain presented a research paper on the topic “Battery Powered Backup Transmission.” at the 2nd e-National Conference on Advances in Mechanical Engineering. NCAME-2021 Organized by the Department of Mechanical Engineering (NBA Accredited since 2009), Sagar Institute of Research and Technology, Bhopal, 06th - 07th May 2021.
PUBLICATIONS 2020
Dr. Nitin Tenguria has published a research paper on the topic “Structural Performance of 14m HAWT blade through CFD” in the International Journal of Innovative Technology and Exploring Engineering, volume 9, 2020.
Dr. Nitin Tenguria has published a research paper on the topic “Verification of Sliding Ratio of Airfoil through CFD Analysis” in the Journal of Scientific Research, volume 64, 2020.
Dr. Nitin Tenguria has published a research paper on the topic “Experimental Investigation of Heat Transfer in Modified Finned Tube Banks Arrangement with in-Line and Staggered Layout” in the International Journal of Innovative Research in Technology, volume 7, 2020.
Dr. Nitin Tenguria has published a research paper on the topic “A review on Three-Dimensional performance Analysis of Circular Fin Tube Heat Exchanger” in the International Journal of Scientific Research and Engineering Trends, volume 6, 2020.
Dr. Irshad Ahmed Khan has published a research paper on the topic “Assessment of Damage in Beam Through vibration indices And Ai Technique” in the International Journal of Research in Technology and Management, volume 6, 2020.
Dr. Irshad Ahmed Khan has published a research paper on the topic “Heat Transfer through Duct with Twisted Tape Inserts: A Review” in the International Journal of Engineering Research in Current Trends, volume 2, 2020.
Dr. Irshad Ahmed Khan has published a research paper on the topic “Mechanical Properties of Silicon Nitride Particles Filled Epoxy Composites” in the International Journal of Engineering Research in Current Trends, volume 2, 2020.
Dr. Irshad Ahmed Khan has published a research paper on the topic “Thermal Properties of Silicon Nitride Particles Filled Epoxy Composites” in Recent Advances in Thermal Engineering, volume 1, 2020.
Prof. N K Sagar has published a research paper on the topic “CFD Analysis of Heat Transfer in Annular Fins of Various Profiles Having Different Shapes of Perforation” in the International Journal for Research in Applied Science and Engineering Technology, volume 8, 2020.
Dr. P K Jain presented a research paper on the topic “Microstructure and mechanical properties of silicon carbide particle reinforced aluminum 6101 metal matrix composite produced by two-step stir casting.” at 10th International Conference on Materials Processing and Characterization (ICMPC), 21st – 23rd Feb 2020.
Dr. Irshad Ahmed Khan presented a research paper on the topic “Effect of Concentration of NAOH treatment on Mechanical Properties of Epoxy/Sisal Fiber.” at International Conference on Advances in Materials Processing & Manufacturing Applications, 5th – 6th November 2020.
Prof Prakash katdare presented a research paper on the topic “Temperature Profile and Pattern Factor at the Exit of Swirl Dump Combustor.” at 1st International Conference on Innovations in Clean Energy Technologies 27th – 28th August 2020.
PUBLICATIONS 2019
Dr. Nitin Tenguria has published a research paper on the topic “Experimental Analysis of a Diesel Engine Run on Different Biodiesel Fuel Blends” in the International Journal of Trend in Scientific Research and Development, volume 3, 2019.
Dr. Nitin Tenguria has published a research paper on topic “Modal Analysis of Large E-Glass / Carbon Fibre HAWT Blade” in the Journal of Emerging Technologies and Innovative Research, volume 6, 2019.
Dr. Nitin Tenguria has published a research paper on the topic “Review on Optimizing Solar PV Efficiency by using Tracking and Cooling System” in Smart Moves Journal Ijoscience, volume 5, 2019.
Prof. N K Sagar has published a research paper on the topic “A Review on Thermal Transport and Fluid Flow B8in High-Temperature Porous Media Solar Thermochemical Reactor” in the Journal of Advances in Science and Technology, volume 16, 2019.
Prof. N K Sagar has published a research paper on the topic “A Review on Phase Change Material (PCM) Heat Exchanger with Spiral-Wired Tubes” in the Journal of Advances in Science and Technology, volume 16, 2019.
Dr. Nitin Tenguria has published a research paper on the topic “Computational Investigation on Thermo-Hydraulic Performance Characteristics of Ribbed Passage with Turbulence Generators” in the International Journal of Scientific Research and Engineering Development, volume 2, 2019.
Dr. Nitin Tenguria has published a research paper on the topic “Heat Transfer Enhancement by Turbulators: A Review” in the International Journal of Innovative Research in Technology, volume 6, 2019.
Dr. D K Koli has published a research paper on the topic “Analysis on Heat Recovery of an Engine Radiator using (CH2OH)2 Based Nano-fluid Having TiO2 Nano Particles” in the Journal of Thermal Engineering and Applications, volume 6, 2019.
Dr. Irshad Ahmed Khan has published a research paper on the topic “Heat Transfer Augmentation Using Twisted Tape Inserts in Heat Exchanger” in the International Journal of Innovative Research in Technology, volume 6, 2019.
Dr. Irshad Ahmed Khan has published a research paper on the topic “Enhancing the performance of spiral tubes heat exchanger using Pcm with nanoparticles” in Technical Research Organization India, volume 5, 2019.
Prof. N K Sagar has published a research paper on the topic “A study on heat transfer and fluid flow analysis of porous Medium solar thermo-chemical reactor” in the International Journal of Advances in Production and Mechanical Engineering, volume 5, 2019.
Prof. Dinesh Ramchandani has published a research paper on the topic “Experimental investigation of a performance characteristic of the compression-ignition engine with biodiesel of Jatropha oil & Coconut oil at fixed compression ratio” in Heliyon, Elsevier, volume 5, 2019.
Dr. P K Jain has presented a research paper on the topic “Finite element modeling and simulation of machining of aluminum metal matrix composites using ABAQUS.” in the 5th International Conference on Advances in Engineering, Pharmaceutical & Applied Sciences, February 21-23, 2019.
Dr. P K Jain presented a research paper on the topic “Theoretical Analysis of Exergy Loss during Compression Process of a Vapour Compression Refrigeration Cycle using R 134 (a) as Refrigerant.” in the 5th International Conference on Advances in Engineering, Pharmaceutical & Applied Sciences, February 21-23, 2019.
Dr. P K Jain presented a research paper on the topic “Development of Silicon Carbide Particle Reinforced Aluminium 6101 Metal Matrix Composite Using Two-Step Stir Casting.” at the 9th International Conference on Materials Processing and Characterization (ICMPC) , 8-10 March 2019.
Dr. D K Koli presented a research paper on the topic “Characterization of Aluminum Matrix Self-lubricated Nano Composites for Wear Resistance Applications” in the 5th International Conference on Advances in Engineering, Pharmaceutical & Applied Sciences, February 21-23, 2019.
Dr. Irshad Ahmed Khan presented a research paper on the topic “Damage Identification of the structures using modal signatures and trapezoidal fuzzy controller” in 5th International Conference on Advances in Engineering, Pharmaceutical & Applied Sciences, February 21-23, 2019.
Dr. Irshad Ahmed Khan presented a research paper on the topic “Fault Diagnosis of Beam through Vibration Analysis and AI Technique” in National Conference on Emerging Trends in Science, Engineering, and Technology, April 12-13, 2019.
Dr. Irshad Ahmed Khan presented a research paper on the topic “Role of Mechatronics System in Mechanical Engineering” at National Conference on Recent Advances in Mechanical, Manufacturing and Industrial Engg. And Tech., March 29-30, 2019.
Prof. Praveen kumar Nigam presented a research paper on the topic “Heat Transfer Enhancement with Nanofluids.” at the 5th International Conference on Advances in Engineering, Pharmaceutical & Applied Sciences, February 21-23, 2019.
Prof. Praveen kumar Nigam presented a research paper on the topic “HAWT Blade Design: A Review.” at 14th International Conference Global Advancement In Engineering, Management, Pharmacy, Science And Humanities, January 19-20, 2019.
PUBLICATIONS 2018
Dr. Nitin Tenguria has published a research paper on the topic “CFD Analysis of Plate heat sink with pin fin having Various Profiles” in the International Journal of Fluid and Thermal Engineering, volume 3, 2018.
Dr. Nitin Tenguria has published a research paper on the topic “Review on Design of Horizontal Axis Wind Turbine Blades” in International Journal on Emerging Technologies, volume 5, 2018.
Dr. Nitin Tenguria has published a research paper on the topic “Comparison of Second Law Efficiency of Halocarbon Refrigerants Ethane Serie Influenced by Evaporator Temperature for Vapour Compression Refrigeration System” in International Journal on Emerging Technologies, volume 9, 2018.
Dr. P K Jain has published a research paper on the topic “Performance Analysis of Triple Concentric Tube Heat exchanger with Ribs” in the International Journal of Research and Scientific Innovation (IJRSI), volume 5, 2018.
Dr. P K Jain has published a research paper on the topic “Thermal Performance Improvement of Single Cylinder IC Engine” in the International Journal of Research and Scientific Innovation (IJRSI), volume 5, 2018.
Dr. P K Jain has published a research paper on the topic “Evaluation of cutting force during machining of aluminum metal matrix composite by finite element modeling and simulation using ABAQUS 6.13” in the International Journal of Technical Innovation in Modern Engineering & Science (IJTIMES), volume 4, 2018.
Prof. Dinesh Ramchandani has published a research paper on the topic “Performance Characteristics of C. I. Engine with Biodiesel Blends of Jatropha, Soyabean Oil and Waste Cooking oil at fixed Compression Ratio” in the International Journal of Vehicle Structures and Systems, volume 10, 2018.